V2 S14/S15 bolt on angle kit (RCC kit) Throttle Wheels at their minimum length they

at their minimum length they start at +25mm over OEM and adjust out to +50mm from OEM

- Hub centric to suit 66

- Fits the Gktech Z33 350z/ Z34 370z Crossmember with slight shaving to one side

- 100% perfect fitment

Circa 60+ degrees of lock is achievable without offset rack spacers once the factory LCA lock stop is removed but if you're running lots of camber or caster using our offset rack spacers is a good idea to avoid steering bind

V2 S14/S15 bolt on angle kit (RCC kit) Throttle Wheels at their minimum length theyThe V2 GKTECH roll center correction kit is now made from 1030 forged steel and provides 40mm of roll center correction, 40mm of bump steer correction and also re positions the steering arm to increase the steering lock. With two different pickup points for the tie rod, this now offers two settings, allowing for more aggressive steering response and less Ackerman which will provide faster steering! The roll centre correction kit bolts up to the bottom